How to Replace a Shower Handle

How to Replace a Shower Handle

Replacing a Shower Handle at a Glance

  • Step 1: Turn off water supply
  • Step 2: Unscrew set screw
  • Step 3: Remove handle from valve
  • If handle is corroded: Add plumber’s lubricant
  • Step 4: Remove trim plate
  • Step 5: Wrap faucet stem with Teflon tape
  • Step 6: Screw handle in place
  • Step 7: Replace trim plate

As wonderful as your shower might be, there are certain things that can always improve your experience — a nice showerhead, a superior sponge, the perfect arsenal of soaps and shampoos and, of course, a nice, functional handle that doesn’t leak.

This May Also Interest You: Showerhead Stuck? Here’s How to Remove It

The good news is that replacing this essential shower control and its accompanying trim is an extremely simple task that you can knock out quickly without eating into your precious shower time.

Can You Replace Just the Shower Handle?

Yes. In fact, sometimes, just changing the shower handle without replacing the valve makes the most sense. A shower handle gets the brunt of the whole “taking a shower” business — getting twisted and turned, pushed and pulled. It’s no wonder they age quickly. Perhaps the style or finish isn’t to your liking, and you’re left wondering how easily you can upgrade without having to call in a plumber.

For this particular project, ye should fret not. In most cases, replacing the shower knob or handle is a pretty straightforward task. Consider the following guide to help you remove a shower faucet handle, install a new one and get on with your day.

How Do You Replace a Single-Handle Shower Faucet?

Shower handles come in a variety of styles, including single-, double- and even triple-handle styles. If you’re working with a shower-tub combo, you might have any one of these setups. A stand-alone shower is more likely to have a single handle, but double handles are also sometimes used. Regardless of what kind of handle you have, the removal and installation process for a replacement is essentially the same.

That said, unless you are committed to replacing your entire shower valve assembly, you should only try to replace a handle of the same style. In other words, if you currently have a single-handle style, then you’ll need to look for another single-handle one to replace it.

Also, keep in mind that if you only plan to replace the shower handle (or handles), you obviously want to make the replacement as close to a match in style and color finish as possible to the rest of the fixtures in your shower or tub. Replacing a tub spout, for example, is a slightly trickier process than handle replacement, as spout lengths and their water pipe counterparts vary. So, if you can get away with just replacing the handles, it’ll save you some time.

If you’d like to try to buy from the same manufacturer, one trick is to look behind the trim plate for a brand name or manufacturer symbol if the name isn’t listed on the handles themselves. Take a look around for a model number while you’re at it, as model numbers are also sometimes listed behind trim plates or even under the tub spout.

Before you begin, use a drain stopper or drop cloth to block the drain opening to keep any small screws or other components from falling down the drain. Dropping small screws happens often and having them promptly vanish into the depths of your plumbing means halting your shower handle replacement project and heading up to your local hardware store to find the right screw.

More Related Articles:

Do I Need to Turn Off the Water to Replace a Shower Handle?

The first step in a shower knob replacement is to turn off the water supply. Many showers have supply shut-off valves on the back or sides of the shower unit, but they’re usually hidden behind the wall. If you’re not in the middle of a larger shower remodel and you don’t have access to those supply lines, you’ll need to shut the water off to your entire home at the main shut-off valve. Once the water is shut off, place the valve in the on position to remove any excess pressure that might still be in the water pipe.

Removing the Handle

Next, find the shower knob handle’s screw. Depending on the style of shower handle, it could be under the decorative cap, or there could be a set screw underneath the handle. Unscrew the set screw using a hex-head wrench or a small Phillips screwdriver. When the set screw has been unscrewed, remove the handle from the valve.

Keep in mind that older handles can be pretty difficult to remove, especially if they’re corroded. If you find yourself in this situation, you can apply some plumber’s lubricant to the handle or use a special tool called a handle puller.

After the handle has been pulled off the valve, remove the escutcheon plate from the wall. Also called a trim plate, this is the panel that covers the hole in the shower wall leading to the valve body.

Installing the New Handle

Once you’ve removed the trim plate, you can begin the process of installing the new handle. For this step, wrap Teflon tape around the base of your faucet stem. Slide the new handle onto the faucet stem and screw it in place using the supplied set screw. For double- or triple-handle systems, the method is the same: Wrap Teflon tape around each stem and screw the handles into place using the supplied screws.

After the handles have been secured, place your trim plate over the top of your new handle and snap or screw it into place, depending on the brand of your trim kit. Once your trim plate has been installed, turn back your water supply back on and enjoy your new faucet.

Small Project, Big Reward

One of the easiest ways to upgrade a shower is changing out the hardware for a more updated look or greater functionality. It’s the kind of quick and painless project that will make you question why you didn’t tackle it sooner.

Got a Stopped-up Sink With a Sink Stopper? Pull Out All the Stops

Got a Stopped-up Sink With a Sink Stopper? Pull Out All the Stops

photo is looking down on a residential bathroom sink that is clogged and slowing draining water

Slow drains can be a hassle. You’re brushing your teeth or washing your face and notice the water isn’t draining from the sink as fast as it’s flowing in. You don’t want to stand there and wait for the sink to empty just so you can wash your hands. And if you’re not careful, a slow drain could lead to leaks and overflows in the future. It’d be easy enough if you could just look down the drain to locate the obstruction, but many bathroom sinks have stoppers that make them more difficult to unclog.

This May Also Interest You: Snake’s in a Drain! How to Unclog Your Sink With a Drain Snake

Got a stopped-up sink with a sink stopper? Here’s how to remove both the drain stopper and the clog.

Common Reasons for Bathroom Sink Clogs

What’s causing your bathroom sink to clog in the first place? One of the most common culprits is hair. If you shave or cut your hair at the bathroom sink, hair can be washed down the drain. There, it clumps together and, eventually, causes clogs. Even if you don’t intentionally rinse hair down the sink, hair that falls out or breaks naturally during the process of brushing or styling can eventually collect in the plumbing below the sink.

Other common reasons for bathroom clogs include:

  • Soap and soap scum buildup
  • Dried or clumped product, including toothpaste
  • Small items stuck in the P-trap

pulling bathroom sink stopper

First, Remove the Stopper…

To unclog your sink, you’ll need to remove the bathroom sink stopper. Sometimes, the stopper is helping to form the clog, and by removing it, you may pull up or release some of the gunk that’s causing the slow drain.

Start by pulling by hand or turning the stopper. Some are made to be easily removed. If that’s not the case, you may need to use some tools and unfasten or unscrew the part holding the stopper in place under the sink. Here’s what to do:

  1. Locate a horizontal rod and stopper strap under the sink. The vertical strap is a metal strip with holes in it.
  2. Find the clip that holds these two pieces together. Take off the clip, but keep it close by. You’ll need it to put everything back together.
  3. Look for the nut attached to the rod and unscrew it. Water may come out when you do this, so put a container underneath the sink to catch it. At this point, you should be able to remove the stopper.

…Then Tackle the Clog

Some of these methods to unclog the bathroom sink will require that you remove the stopper. Others can be tried without going through that step.

Boiling Water

Boiling water can clear some clogs, especially those created by buildup or soap. Hot water dissolves grease and other solids so they can be pushed out of your pipes. Make sure the sink is empty and pour boiling water from a pot or kettle slowly down the drain. You can try this without removing the stopper. This can also work on some clogs in your kitchen sink.

Before you try this method, double check that your pipes are made of metal and not PVC; the boiling water may melt PVC pipes. Also, try not to pour the hot water directly onto the surface of your sink. Porcelain sinks may crack due to the abrupt temperature change.woman plunging sink

Use a Plunger

The plunger is something you can try when you’re working to unclog any drain. You can attempt this fix with the stopper in place, but it’s going to work best without the stopper in the way. Simply place the plunger over the drain and create a seal. Then, push the plunger up and down quickly a few times. This creates a force in the pipe that can push or pull a clog loose.

More Related Articles:

Natural Products

Pouring a mixture of baking soda and vinegar down the sink can help dissolve some clogs. You may also be able to purchase drain cleaning products at the store for this purpose. As long as you can get some of these products down your drain to begin with — i.e., there’s no physical obstruction or standing water — you don’t need to remove the stopper.man rotating a drain snake into a kitchen sink to unclog the pipe

Snake the Pipe

Remove the P-trap from below your sink and look for any visible clogs. Then, you can use a drain snake or even a straightened wire coat hanger to push the clog out from above. Usually, you have to remove the stopper to do this, but you might be able to get a thin pipe snake down the drain without doing so. Put a large bowl or bucket under the sink to catch any water.

When Should You Call a Professional About Your Clog?

Many clogs can be handled with these and other DIY measures, especially if you have a little bit of plumbing knowledge. The above tips, for example, can also be used to unclog bathroom drains or deal with similar issues in the kitchen.

But not all issues can be attacked with a pot of boiling water or a plunger. If you’re dealing with something like a clogged sewer line or a clog your drain snake can’t reach, you may need to call in a professional. Ignoring the clog could lead to even more expensive repairs later on. Standing water may cause moisture damage, mold or even nastier problems.

Since we’re all home now more than ever, being prepared for unexpected home repairs with a plan from Service Line Warranties of America is important. Having a plan in place gives you peace of mind knowing that you can simply call our 24/7 repair hotline for covered breakdowns. See what plans are available in your neighborhood.

Pipe Burst? Here’s What to Do Next

Pipe Burst? Here’s What to Do Next

burst pipe with water coming out

There’s nothing worse than that sinking feeling that sets in when you notice water dripping from your ceiling or — worse — gushing from a broken pipe. Many homeowners find themselves panicking as they start to tally up the water damage repair costs. Fortunately, a bit of forward planning can help you avert a total plumbing disaster.

This May Also Interest You: Prevent Frozen-Pipe Problems by Knowing These Things Down Cold

If a water pipe bursts in your home, it’s important to act quickly to prevent serious water damage to your house and belongings. Knowing what to do when you have a broken water pipe can save you a lot of money on costly plumbing and building repairs.

What Happens When a Pipe Bursts?

There are several reasons that your pipes could burst, though one of the leading culprits is ice. When the temperature outside dips below freezing, the water in your pipes can freeze, too. When water freezes, it expands, putting significant pressure on your pipework.

When your pipes freeze for the first time, they may withstand the added pressure without any adverse effects. However, allowing your pipes to freeze repeatedly will gradually weaken them as they expand and contract, eventually causing them to burst or crack.

Other potential causes of burst pipes include:

  • Corrosion
  • High water pressure
  • Blockages
  • Invading tree roots

Whatever the reason for a burst pipe, spotting it early is crucial for protecting your home.

How Do You Know If Your Pipes Have Burst?

When you mention broken pipes, most people imagine water gushing dramatically from the wall or ceiling. However, the first signs are often subtler. It’s a good idea to look out for the less obvious symptoms of a major leak.

When a water pipe bursts, moisture starts seeping into your floors, ceilings and insulation, causing significant damage. Eventually, mold and mildew start to flourish, creating a potentially hazardous living environment. If you find yourself wading through puddles of water on the floor or can hear water bubbling inside the walls, you won’t be left in any doubt as to whether you have a burst pipe.

Other, less obvious signs include:water meter wrapped with dollar bills

Unexplained Hike in Water Bills

If your water bill suddenly shoots up for no apparent reason, it could be a sign of a burst water main. As water seeps out of the pipe, it sends your water usage sky high. Any unexpected increase in your water bills warrants further investigation.dripping faucet

Reduced Water Pressure

A broken water main or burst pipe means your system must work harder to maintain a supply to your faucets and other fixtures. Therefore, reduced or uneven water pressure could be a sign that you’ve got a leak. While there are a few potential causes of dodgy water pressure, it’s important to find the reason quickly to prevent water damage.

No Flow

Reduced water pressure is inconvenient enough, but you may suddenly find that you have no water flow at all. One of the most likely reasons for a complete lack of running water is a frozen pipe. You should defrost your pipes as quickly as possible to stop them from bursting.

If you can access the frozen pipe, you could try defrosting it yourself. Turn on the central heating to around 70 degrees and use a gentle heat source like a hairdryer or infrared lamp to warm the pipe up gradually — never use a blowtorch or other open flame. If the pipe is inaccessible or your efforts aren’t fruitful, call a plumber to defrost the pipes for you.

Damp Patches in Your Home or Yard

As water flows out of a burst pipe, you may notice damp or discolored patches on your walls, floors or ceilings. If the leak happens under a tiled floor, it could make the tiles feel wobbly or unstable.

Don’t forget to look for exterior signs of a burst pipe. Depending on the location, you may also see puddles, depressions or wobbly pavement in your yard.

More Related Articles:

turning hot water valve

What Do You Do If Your Pipes Burst?

As soon as you see the signs of a pipe burst in your house, you should immediately turn the water supply off at the main. If you have a minute, locate your stopcock now so you’re able to find it fast in an emergency. Turning the water off stops the flow to your pipes and prevents more water from seeping into your home.

Next, call an emergency plumber to locate and fix the burst pipe. While you can often repair minor leaks yourself, a burst pipe requires urgent diagnosis and replacement by a professional.

While you wait for the plumber, there are steps you can take to reduce the damage. Start by moving furniture and any valuable items as far away from the burst pipe as possible. Doing this will also make it quicker and easier for the plumber to access the problem area when they arrive.

If you can see and access the leak, plugging it with rags can staunch the flow and protect your walls and insulation. You can reduce damage to your floor by placing buckets to catch any flowing or dripping water. Use towels to dry any puddles.

water service line

Protect Your Home Long-Term

Prevention is better than cure when it comes to frozen pipes and broken water mains. Fortunately, there are some simple and cost-effective ways to prevent major leaks and protect your home:

  • Use insulation to prevent freezing pipes
  • Keep your central heating on when outside temperatures drop below freezing
  • Repair small leaks quickly
  • Resolve clogs and corrosion as soon as you notice them

Being prepared with a plumbing plan from Service Line Warranties of America can help you handle unexpected plumbing emergencies. When you have a plan in place, simply call our 24/7 hotline to get connected with pros who can get your system up and running again. See what plans are available in your area.